~COMING SOON~
For Any MGB 1962-1980 that is being fit with Fuel Injection or carburetor with need for additional fuel Volume. This system comes with a 3/8" Feed line and a 5/16" return line which replaces the factory 5/16" feed and 1/4 vapour line. Solid Stainless Steel Construction.
• End fittings are sized AN6 for trouble free soft line fitting. Note: AN6 is standard 3/8" line. AN5 (5/16") is difficult to aquire, so AN6 is most commonly used.
• Lines start next to the Battery box as per original.
• Termination to the engine compartment ends at an location approximately similar location to factory, but goes up at an angle behind the bellhousing, making installation after driveline installation possible.
• Built with MGB V6 and V8 Conversions in mind.
• These prefit lines are split in the middle to fit in a shipping box which avoids oversize freight charges.