*Sold Individually*
For All 1962-1980 MGBs fit with Fuel Injection or Carburetor, our CNC produced Solid Stainless Steel Constructed lines offer easy installation and volume for just about any power level you can stuff into an MGB. Our 3/8" lines use AN6 hardware to reduce the hassle of original fittings. Produced originally for an easy installation Feed line, when ordering two, one can be used as a return line as well in place of the original vapour line that returned to the tank. Many modern fuel injection systems require a feed and return in a looped system. The original carbureted MGB used 5/16" feed line and a 1/4 vapour line.
• Sized with AN6 on 3/8" lines for easier and quicker fitting.
• Lines start at the rear of the car next to the battery box as per original. From this point rearwards, many build different tank designs in which we recommend stainless braided hose.
• Termination in the engine compartment ends at a location approximately similar location to factory, but goes up at an angle Behind the bellhousing, making installation after driveline installation possible. -In our shop, we only add one 90° bend during our installation afterwards.
• Built with MGB V6 and V8 Conversions in mind.
• FOR SHIPPING PURPOSES ONLY: These prefit lines are split in the middle to fit in a shipping box which avoids oversize freight charges. They will have to be spliced back together. For other shipping options, or to Alternatively have them Bent in the middle, please contact us BEFORE the order is placed.
MADE IN THE USA. -as All of our Bespoke Conversion items have always been.