LED Rear Light Board Set for
MGB | MG Midget | Austin Healey Sprite
Choice of Model Years: 1961-1969 -OR- 1970-1980
Modern vehicles have Exceptionally Bright tail-lamps, and we can no longer expect modern commuting drivers to understand or yield to our [Rare to Drive behind] Classics. In comparison, they Can't see ANY light output from older designed tail lamps with poorly executed lighting, when comparing to todays car models. The Original incandescent lighting, and even what some salemen will tell you are the "Good" Generic LEDs Brake, Parking and Turn Indicator "bulbs" Do Not hold a Candle to the light output of our well designed and produced Classic Auto LEDs.
Classic Auto LED boards are Brighter than ALL the rest. Additionally, our lights are designed to fill the Entire tail light lens, a Very Important Factor those generic lights will Never accomplish.
Classic Auto LEDs, Manufactured In-House by BMC with the Only 10 Year Warranty in the business, and we have the Brightest Taillights. Brightest is Not a Slogan. That's Not marketing scheme. It's Fact!
Classic Auto LEDs brand Lighting System for Your Tail Lamps:
We are the First and Oldest LED Light Source for British (and some other) tail lamp board inserts and have a Proven Track Record of the Best lights. We produce lights that we hope will last your lifetime. All lighting is built on boards SPECIFIC for each tail lamp design- No one size fits all! The lighting is built to face rearward towards the Red, Amber, or Clear lens and traffic- No Reflector to be reused, dropping light intensity as universal bulbs have. Using boards gives us three advantages: the light direction all faces rearward, the count of the bulbs (with intensity), and the total volume of taillight filled to create a Scale Effect. For those who ask for reduced cost, we could always face less bulbs per board, remove voltage stabilizing elements, or reduce to a one size fits-all, but that messes with the whole point- The Brightest and Large Spread Out Lighting IS SAFETY! Would you ask for seatbelts that cost half as much if it "only" cut the effectiveness by 25% ? Our goal is to be Seen, and make our Classics as Safe as we can offer.
Far Superior Lighting is Classic Auto LEDs End Result.
This Complete set includes an LED Bulb Count 240 LEDs in Complete sets of Four tail lamp boards. This product includes Lighting boards and hardware to install. Does not include lenses and original or replacement components for the vehicle. Any lens shown for identification purposes only.
Features of our Lighting Systems:
- Reverse voltage and over voltage protected.
- Current controlled to provide constant brightness over a wide range of voltage.
- The LEDs are rated for 10000 hours continuous use.
- The LED array uses 80% to 85% less current then the standard tail light bulb.
- The LED circuit boards plug directly into the existing wiring harness including the ground wire, not the socket- No light flickering that socket fit LED bulbs have.
- Most units do not require any modifications to the car other than removing the existing wires from the tail light housing and installing the new units. See the attached instructions for what installation requires per vehicle model.
- Choices in Ground Polarity Positive + or Negative -
- Lens Region/Type Available Both UK/Eurospec/World AND North American/USA
- Colours of our systems include Red and Amber, with some systems having white light when clear lenses are present.
US VERSION:
- BEHIND THE TOP LENS IS THE PARK/BRAKE WITH 40 LEDS PER BOARD, 80 PER UPPER BOARD SET.
- BEHIND THE BOTTOM LENS IS 80 BULBS WITH A MIX OF RED FOR PARK BRAKE AND AMBER FOR TURN. 80 PER SIDE, 160 PER LOWER BOARD SET.
- TOTAL OF 240 BULBS PER BOARD SET.
UK VERSION:
- BEHIND THE TOP LENS IS AMBER TURN INDICATOR WITH 40 LEDS PER BOARD, 80 PER SET.
- BEHIND THE BOTTOM LENS IS 80 BULBS WITH RED FOR PARK/BRAKE. 80 PER SIDE, 160 PER SET
- TOTAL OF 240 BULBS PER BOARD SET.